Your cart is currently empty
Product image slideshow Items
Seachem Tidal 35 Power Filter is made in Italy, ideal for freshwater or saltwater applications with a built in surface skimmer and self priming feed pump. No priming is required for this model and they feature a super quiet operation with a hang-on-filter
Seachem Tidal Power Filter is made in Italy, ideal for freshwater or saltwater applications with a built in surface skimmer and self priming feed pump. No priming is required for this model and they feature a super quiet operation with a hang-on-filter design. Easily adjust the flow rate with the uppermost dial and the lowermost dial to choose whether you wish water to pull primarily from the surface skimmer, intake pipe or both. This filter provides the option of using heater clips, located on the side; however, they may be removed if you do not wish to use them. A blue peg located at the top will automatically pop up alerting you when it requires maintenance. The 35 gallon model pushes 130 gallons per hour and uses a maximum of 6 watts while the media capacity holds 0.7 L. The Tidal Power Filter is newly designed from the ground up to provide your aquarium with optimal filtration and low maintenance for a super clean and healthy environment. Your aqua life needs clean filtered water to grow at their best potential. Trusted and used by hobbyists and experts.
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
The flow on the pump is adjustable using the dial on the front
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles.
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.
Length: 6 ⅛ in (15.5 cm)
Width: 5 ⅛ in (13 cm)
Height: 7 ⅛ in (18 cm)
Length: 5 ⅜ in (13.8 cm)
Width: 2 in (5.2 cm)
Height: 4 ⅞ in (12.5 cm)
2 ¾ in (7 cm)
13⁄16 in (2 cm)
1 ⅜ in (3.5 cm)
Up to 35 US gallons (130 Liters)
130 US GPH (500 L/H)
6 - (120 v - 60 Hz)
5 - (230 v - 50 Hz)
0.2 US gallons (0.7 Liters)
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.